Menu Option: Usb Upgrade - Paradigm soundplay Manuel Du Propriétaire

Service > Firmware > MAC LAN: Pressing the enter
button will display the current firmware version for
the mac address of the soundbar's LAN.
Service > Firmware > MAC Wi-Fi: Pressing the
enter button will display the current firmware
version for the mac address of the soundbar's
Wi-Fi.
Service > Factory Reset: Enter the submenu
by pressing the enter button. Resetting the
soundbar will restore all settings to the factory
defaults settings. This will erase all user-con-
figured presets, and Anthem Room Correction
data. This function requires confirmation to
reduce risk of performing an accidental reset.
Service > Factory Reset > At Home: Enter the
submenu by pressing the enter button.
Service > Factory Reset > At Home > No:
Activate by pressing the enter button. Choosing
this option will exit without performing a reset.
Service > Factory Reset > At Home > Yes:
Activate by pressing the enter button. The
soundbar will respond with 'Resetting'. Once
complete, your soundbar will be reset to fac-
tory default Home settings. After a reset has
been performed, there is no way to recover the
previous settings.
Service > Factory Reset > In Store Enter the
submenu by pressing the enter button.
Service > Factory Reset > In Store > No:
Activate by pressing the enter button. Choosing
this option will exit without performing a reset.
Paradigm Soundplay Manual 101816.indd 26
Service > Factory Reset > In Store > Yes:
Activate by pressing the enter button. The
soundbar will respond with 'Resetting'. Once
complete, your soundbar will be reset to fac-
tory default Home settings. After a reset has
been performed, there is no way to recover the
previous settings.

MENU OPTION: USB Upgrade

USB Upgrade: Enter the submenu by pressing
the enter button.
USB Upgrade > Upgrade DSP > Off or On:
This option turns the DSP Upgrade off or on.
Activate by pressing the enter button and the
soundbar will respond with 'Saved'.
USB Upgrade > Upgrade TC390 > Off or On:
This option turns the TC390 Upgrade off or on.
Activate by pressing the enter button and the
soundbar will respond with 'Saved'.
USB Upgrade > Upgrade MCU > Off or On:
This option turns the MCU Upgrade off or on.
Activate by pressing the enter button and the
soundbar will respond with 'Saved'.
USB Upgrade > Upgrade ALL > Off or On:
This option turns the ALL Upgrade off or on.
Activate by pressing the enter button and the
soundbar will respond with 'Saved'.
26
2016-10-18 12:19 PM