Connection; Power Connection - Paradigm soundplay Manuel Du Propriétaire

Fig. 3

CONNECTION

Turn your soundbar off before
making or breaking any signal
connections! WARNING! The
p owe r co rd s h o u ld n o t b e
installed, removed, or left detached from the
soundbar while the other end is connected to
an AC power source.

POWER CONNECTION

The power cord should be firmly inserted into
the AC power receptacle on the rear connection
panel of the soundbar, then to any convenient AC
wall outlet. The soundbar also integrates a signal
sensing power supply that automatically switches
into standby mode after sensing no audio signal
for approximately 20 minutes (this will only occur
when the menu's power setting is set to 'Auto
Standby').
Paradigm Soundplay Manual 101816.indd 10
M6
7mm 3.2
13.7mm
Fig. 4
2mm
10
2016-10-18 12:19 PM