Technical Data - Russell Hobbs RHG03 Instructions

Heater cannot be
turned off
Heater will not
remain alight when
the ignition button is
released

TECHNICAL DATA

Brand Model
Russell RHG03
Hobbs
Operating Pressure
2.8 kPa
CHANGING THE PLUG
Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on 230V current only. Connecting to other power
sources may damage the appliance. Connect a three-pin plug as follows:
The wires in this mains lead are coloured in
accordance with the following code:
Green/Yellow = Earth
Blue = Neutral
Brown = Live
All manuals and user guides at all-guides.com
Cabinet heaters must always be turned OFF by closing
the gas cylinder valve (clockwise
in the fully open position and will require some effort to
start the closing operation.
The Oxygen Depletion Sensor solenoid is not keeping
the control open. Have the heater serviced by an
authorised service agent.
Should this happen after storage, the components may
require cleaning.
Rated Gas Consumption
 1 panel (ghr
-1
)
 2 panel (ghr
-1
)
 3 panel (ghr
-1
)
Electric Heater
Element 1
Element 2
). Note that it may be
Rated Power
103  1 panel (W)
206  2 panel (W)
310  3 panel (W)
1000W 230V
1000W 203V
1 400
2 800
4 200