St Ar Ting/Warming Up T He Cof F Ee Mac Hine; Rinsing The Machine/Inner Circuits - CULUS pod1 plus Mode D'emploi

St ar ting/warming up t he cof f ee mac hine

• Use pods suitable for this model only.
• Insert the plug of the power cord into the electrical socket.
• Switch on the appliance with the main switch (9).(Fig.4)
• When the led (2) turns on, the coffee machine is ready for
use (Fig.4).
• The control buttons will start flashing. Once the right
temperature is reached, they will illuminate steadily, indicating
that the machine is ready for use (Fig.4).

Rinsing the machine/inner circuits

The machine should be rinsed both at its very first use and
when it has been inoperative for a long spell of time. By
performing this quick procedure, you will ensure that all inner
circuits are rinsed.
•Ensure that there are no pods inside the unit; power on the
• Remove the grid (5). (Fig. 5)
(D) (Fig. 7) and wait until delivery
• Press button
is complete. Now the machine is rinsed.
NOTE
The grid height (5) can be adjusted depending on
the cup size. You can choose two different positions.
To adjust the grid to its maximum height, lift the support
(14), place it against the pods collection box, and
(Fig. 5).
drive it into its seat
• To prepare espresso lungo, place the grid (5) at
(Fig. 6)
its lower position
• To properly prepare an espresso, place the grid
(5) at its highest position (Fig. 7)
Fig.6
Dispenser buttons
Fig. 4
Fig.5
D
Fig.7
9
9
5
14
6
5