Samsung HW-M4500 Mode D'emploi page 26

Masquer les pouces Voir aussi pour HW-M4500:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Surround

SOUND
MODE
SOUND MODE

VOL
WOOFER
Source
Bluetooth
POWER

SOUND
MODE
Play / Pause
Bluetooth
Surround
POWER
SOUND
MODE
VOL
WOOFER
VOL
WOOFER
Bluetooth
POWER
You can select the desired sound effect by choosing STANDARD, MUSIC, CLEAR VOICE,
SPORTS, or MOVIE.
Select the "STANDARD" mode if you want to enjoy the original sound.
• DRC (Dynamic Range Control)
Lets you apply dynamic range control to Dolby Digital tracks. If you press and hold the
SOUND MODE button while in standby mode, DRC (Dynamic Range Control) turns on
or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.)
Press to select a source connected to the Soundbar.
• BT PAIRING mode
To turn on "BT PAIRING" mode in "BT" mode, press and hold the
for more than 5 seconds. See page 17 for details.
• Auto Power Down Function
The unit turns off automatically in the following situations.
– D.IN / HDMI / BT / USB Mode : If there is no audio signal for 5 minutes.
– AUX Mode :
– If the Audio (AUX) Cable is disconnected for 5 minutes.
– If there is no KEY input for 8 hours when the Audio (AUX) Cable is connected.
(Auto Power Down function can be turned off only in that case.)
– To turn off Auto Power Down function, while in "AUX" mode, press and hold the
p button for 5 seconds. "ON-AUTO POWER DOWN" / "OFF-AUTO POWER
DOWN" appears on the display.
Press the p button to pause a music file temporarily.
If you press the button again, the music file plays.
ENG - 22
(Source) button

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hw-m4501

Table des Matières