In Case Of Difficulty; Resetting Your Telephone's Programming - Uniden UCIS-3050C Guide D'utilisation

Resetting Your Telephone's Programming

Electrostatic or power surge (e.g., from lightning) may cause the
phone to lock up. There are two ways to reset this phone.
1.
2.
22
All manuals and user guides at all-guides.com

In Case of Difficulty

Basic reset
• Disconnect the telephone line cord from the phone.
• Disconnect the AC adapter from the phone. If back up
batteries are installed, remove one of them.
• Press the
seconds;
• Reconnect the telephone line cord and the AC adapter to the
phone.
• Follow the installation procedures to select the language and
to enter the area codes.
• Re-install back up batteries.
Full reset
If the basic reset cannot return the phone to the normal
operating condition, you must do a full reset. All information
stored in memory will be erased during a full reset.
• Disconnect the telephone line cord from the phone.
• Disconnect the AC adapter from the phone. If back up
batteries are installed, remove one of them.
• Press the
seconds.
• Press and hold the DELETE and
the AC adapter to the phone.
• Reconnect the telephone line cord.
• Follow the Installation procedures to select the language and
to enter the area codes.
• Re-install back up batteries.
button or the button two times. Wait for 10
button or the button two times. Wait for 10
buttons when reconnecting