Table des Matières
Publicité
All manuals and user guides at all-guides.com
Switching Between the Handset and the Speakerphone
To switch a call between the Handset and the Speakerphone during
a conversation:
While talking on the handset, press the Speaker button to
1.
activate the speakerphone. The call can now be heard from the
speakerphone.
2.
While talking on the speakerphone, simply lift up the handset
and the call will be transferred to the handset and will no longer
be heard on the speakerphone.
Hang up the handset. Hanging up the handset will not
3.
disconnect the call when the Speakerphone is activated. You
have to press the Speaker or the Goodbye button to disconnect
the call.
4.
If the speakerphone is not activated, simply hang up the handset
and the call will be disconnected.
Redialing
You can redial the last number you called with just one touch of the
Redial button. This lets you easily redial the same number again if
the line was busy.
Pick up the handset or press the Speaker button and listen for
1.
a dial tone.
Press the Redial button and the last number you dialed will be
2.
shown on the display and will be automatically dialed.
Putting a Call on Hold
The Hold button allows you to place a call on "HOLD" without
disconnecting the call. When a call is on hold, you may hang up the
handset without disconnecting the call.
Press the Hold button and the current call will be placed on
1.
hold. The red Hold light is turned on when a call is on hold.
2.
To continue the conversation, press the hold button again.
11
Publicité
Table des Matières
