Security Instructions - Billow Technology URBAN85 Guide De L'utilisateur

conditions for the stability of the scooter are met (for example, it can not be used
by a person under the influence of drugs or alcohol). When using the scooter, it
is recommended that the user wear a helmet for greater safety, the helmet helps
save lives in the event of an accident.
Be sure to check that the steering system is properly adjusted and that all
components of the connection are firmly secured and not broken before driving,
refer to the handlebar assembly and safety instructions.
Always wear shoes.
When the safety nuts and other safety accessories may lose their effectiveness, do
not use the E-Scooter and contact technical support.
It is totally forbidden to modify the quality of the original parts and materials of
the E-scooter.

Security instructions

We recommend that you always wear a helmet and protective equipment such as
elbow pads, knee pads and wrist guards to ensure your personal safety.
Make sure you have read the user manual carefully, to make sure you know how to
drive it safely and fun.
It is your responsibility to be aware and comply with all the regulations according to
your country. If there is no regulation for this scooter in your country, take care of your
own safety and the safety of others.
Pay attention to other people. Always drive safely and only at a speed that allows you
to brake safely at any time. Something common to all these products is that there is a
risk that they may fall off the product and injure themselves. Always drive in the safest
way possible.
Avoid applying too much force or stepping on the rear fender permanently. This can
cause the fender to loosen or damage the spring that supports the mudguard.
As a result, the brake shoe constantly touches the wheel and the engine temperature
increases due to the additional resistance. The rear tire can also loosen if the brake is in
the braking position constantly.
Avoid constantly braking. As a result, the tires will not only wear out, they will heat up
permanently. This will soften the wheel and will no longer have the same grip on the
road as normal. Do not touch the tire after braking.