TFK duoX Notice D'utilisation page 10

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
All manuals and user guides at all-guides.com
Use with two carrycots
- (pic.VIII) Remove the seat covers, belly frame and the
canopies (Please have a look to the instruction of the Twin
stroller). Bring the front carrycot tube (14) in position next to the
pushbuttons left and right at the frame and push the clip at
the frame tube in the middle, till it is fixed. Close the bars at the
left and right end of the carrycot tube.
- (pic.IX) Plug the rear carrycot tube (15) first in the fixation at
the left vertical frame tube. After that place it with the clip
over the frame tube in the middle and the right end of the
tube to the fixation at the right vertical frame tube. Push it till it
is audiable secured. Now you can fix the carrycots like it is
described in pic.VII. Take off the carrycot tubes
Adjustment of DuoX carry cot
- (pic.X) To bring DuoX into sitting position, pull metal bar
(5, Fig.III) and lift carry cot. Then rotate the adapter bar (16)
and relock the carry cot. You can bring backrest intop sitting
position by pulling the belt (17).
- (pic.XI) Sitting and foot rest area of DuoX can be adjusted by
zipper (18).
Remove adapter tubes
- (pic.XII) To remove the carrycot tube in front (8 + 14) open
the locks at the tube ends and pull it off. To remove the rear
carrycot tube (10 + 15) , open the bar (19) at the tube end in
the direction of the arrow and pull it towards you. Now you
can fix the seat covers, canopies and the belly frame.

Publicité

Table des Matières
loading

Produits Connexes pour TFK duoX

Table des Matières