In Shape 17065 Manuel D'instructions page 23

Step 4
Attach the computer bracket (18) to the
handlebar (15) using a screw (16).
Insert 2 x 1.5 V AAA batteries into the battery
compartment on the computer (11). Check
that the batteries are correctly � tted.
Connect the cables between the computer
and the spinner bike.
Attach the computer (17) securely to the
computer bracket (18).
Step 5
Attach the left pedal (06L) to the left pedal
crank by screwing it anti-clockwise.
Attach the right pedal (06R) to the right
pedal crank by screwing it clockwise.
Check that all bolts and nuts are tightened
properly.
The spinner bicycle is now assembled and
ready for use.
GB
23