Levelling The Refrigerator; Installing The Handles - Samsung RB28F Serie Mode D'emploi

LEVELLING THE REFRIGERATOR

If the front of the appliance is slightly higher than
the rear, the door can be opened and closed more
easily.
Case 1) The appliance tilts down to the left.
Turn the left adjusting leg in the direction of the
arrow until the appliance is level.
Case 2) The appliance tilts down to the right.
Turn the right adjusting leg in the direction of the
arrow until the appliance is level.
< Case1 >
18_ setting up
DA68-02833S-20.indb 18

INSTALLING THE HANDLES

(APPLICABLE MODELS ONLY)
1. Align each screw hole of the handle to the
corresponding screw hole of the door.
Then, insert the provided screws (x2) and use a
Phillips screwdriver to tighten them.
< Case2 >
2. Insert the Cap-Handle Screws (x2) into each
handle hole on both sides.
3. Repeat the steps above to install the handle on
the other freezer or fridge door.
4. Insert the Cap Screws (x2) into the door holes
of the opposite side of the door where no
handle is installed.
CAUTION
The handles are included in the product
package.
Cap-Handle
screw
Use caution when installing the handle.
The door may be scratched.
Cap screw
2018. 6. 5. 3:04