Inserting the batteries
1
Open the remote casing.
3
Close the housing
Auto Standby
The energy consumption of this device in operation mode and in the
standby mode has been reduced. Therefore, if no action is recorded
after four hours, the unit will automatically enter standby mode. Simply
press.
2
Insert two LR03 batteries (AAA) observing the
+/- indicators (plaice not included).
Remarks:
- Remove the batteries from the remote in
case of prolonged non-use.
- Wash your hands after handling the batteries.
- Remove the batteries in collection bins
(please ask your dealer) to protect the
environment.
Note: Batteries are not included.
EN-14