Side Controls; Wireless Receiver Installation - weewell WMV850 Mode D'emploi

11. Menu Button: Press to Access the Receiver Menu. Press the button again to exit.
You must have more than one camera configured on the system when
using functions that require more than one camera.

Side Controls

Night Light Button: Press to remotely turn Night Light ON or OFF (for the
12.
camera currently being displayed on the LCD Screen). When the night light is on,
an indication icon will be displayed on the LCD screen.
13. Volume Button: Press to adjust the volume
of the receiver.
14. DC 5V Power Input: Connect the included
DC 5V Power Adaptor to power the receiver
and/or charge the Receiver battery
Power On/Off Button: Press to turn the
15.
Receiver ON or OFF.
16. Stand: Flip the stand out to place the
receiver on a flat surface (such as a table or
countertop).
17. USB: To connect USB cable to the receiver.

Wireless Receiver Installation

1. Place the Receiver in a place that will have clear reception with your camera(s).
2. Plug the AC adaptor power output cable into the 5V POWER input of the Receiv-
er. Plug the power plug into a wall outlet or surge protector.
3. Leave the receiver to charge for 6
rechargeable receiver battery is fully charged. DO
from the receiver during initial charging process. After initial charge, charge as
required.
4. If you wish to view the Receiver images on a larger screen, Connect the included
USB cable to view video from the receiver on your computer. (NOT compatible
with MSN & Skype)
6 I
WMV850 USER MANUAL
All manuals and user guides at all-guides.com
hours prior to first time use so the built-in
NOT remove the power cable