Melitta 123 Spresso MEPE123W Manuel Du Propriétaire page 9

Prepare Cappuccinos,
Lattés, Mochas, Macchiatos
The steam function can be used to make hot milk for cafe latté or to
make froth for cappuccino.
1. Place your cup of espresso on the 123 Spresso handy Cup
Warmer. This will help keep the coffee warm.
2. Press the ON/OFF Switch to the "ON" position.
3. To prepare steam for froth, turn the Temperature Switch to
the "STEAM/FROTH" Position.
4. Slide Frothing Attachment onto Steam Nozzle as far as possible.
The Frothing Attachment fits snugly over the Steam Nozzle.
Always turn small pressure relief hole so that it is pointed
backwards, facing the machine. Swivel the frothing tube outward,
away from the machine and towards you.
Adjust the Frothing Attachment so that it fits down into a heat proof
cup or handled frothing pitcher with cold milk.
5. Fill the frothing pitcher 1/3 to 1/2 full with cold milk.
6. When the machine has heated to the correct temperature and is
ready to froth milk, the Green "GO" Light will illuminate.
Function
Selector
STEAM/FROTH
position
7. Turn the Function Selector from
FROTH" Position.
8. The machine will automatically begin to release steam.
and More!
•
"NEUTRAL" to the
9
"STEAM/