Setting Language - Disney DT1900-P Guide D'utilisation

SETTING LANGUAGE

This TV can display the on-screen language in English, Spanish or French.
Select the language you prefer first, then proceed with the other menu options.
1
Press the MENU button.
2
Press the or
to select "LANGUAGE", then
press the button.
NOTE:
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text
will not be affected by the language selection.
TV OPERATION
1
To turn on the TV, press the POWER button.
2
The VOLUME can be adjusted to a desired level by
pressing the + or
The sound level will be indicated on the TV screen by
the character.
3
Set the TV/CABLE menu option to the appropriate
position. When shipped from the factory, this menu
option is in the CABLE setting. See "TO MEMORIZE
CHANNELS".
TV - VHF/UHF channels
CABLE - CABLE TV channels
4
(CHANNEL)
Press and release the
button. The channel automatically stops at the next
channel set into memory. Press and hold the button
down to change channels more quickly.
For proper operation, before selecting channels,
they should be set into the TV's memory.
See "TO MEMORIZE CHANNELS".
button
– (VOLUME) button.
and buttons
(CHANNEL) or
3
Press the or
to select the desired language:
English (ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS).
4
Press the MENU button to return to normal TV viewing.
Direct Channel Selection buttons (0-9)
Press these buttons to select a channel. The channel
number will appear on the upper right corner of the TV
screen. If an invalid channel number is selected, the display
will revert to the original channel.
TV Mode Direct Channel Selection
When the TV/CABLE menu option is in the TV position, all
channels can be instantly selected by using two buttons
(For example, to select channel 2, press "0", then "2". If you
press only "2", channel selection will be delayed for a few
seconds). For channels 10 and above, press the 2 digits in
order.
CABLE TV Mode Direct Channel Selection
When the TV/CABLE menu option is in the CABLE position,
channels can be selected as follows:
CH. 1-9 Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press
"002".
CH. 10-12 Press "0", then remaining 2 digits.
Example, to select channel 12, press
"012".
CH. 13-99 Press the 2 digits in order.
Example, to select channel 36, press
"36".
CH. 100-125 Press the 3 digits in order.
Example, to select channel 120, press
"120".
NOTE: If the station being viewed stops broadcasting, the
TV will automatically shut off after 15 minutes.
button
7