Publicité
Les langues disponibles
Les langues disponibles
• Do not leave the appliance unattended.
• Please make sure that the ventilation parts are not
blocked and free from dust or foreign objects.
• Do not use the appliance to dry towels or clothes.
Risk of fire!
• Do not place the appliance on a carpet while in use.
• The use of accessory not recommended by the
manufacturer, e.g. time switches, may cause harm.
Warning: In order to avoid overheating, do not
cover the heater!
Installation
•
Components (1):
1: Thermostat control (min – max)
2: Power rotary switch
3: Power cord storage
4: Radiator fin
5: Wheels
•
Installation of radiator feet:
Operation
•
Heating:
1. Before operation, place the appliance in an upright position on a flat, stable and heat-resistant surface.
Make sure no flammable objects are near in a radius of 1 meter.
2. Turn the thermostat control to "min" and the power rotary switch to "0". Afterwards insert the power
plug into a wall socket.
3. At the power rotary switch, choose between "
III
"
" (maximum heating level).
4. Please turn the thermostat control to "max". The lamp at the appliance will light up. When the room has
reached a comfortable room temperature, turn the thermostat control counter-clockwise until the lamp
goes off. If you wish to increase the temperature, turn the control clockwise. If you wish to decrease
the temperature, turn the control counter-clockwise.
Please note: While turning the thermostat control, the lamp will only light up if the selected temperature
is higher than the room temperature.
5. To turn off the appliance, turn the power rotary switch to "0".
•
Tip-over protection:
The appliance is equipped with a tip-over protection. Should the appliance tip over or stand at
o
an excessive angle, the appliance will turn off automaticaly. This function helps preventing
accidents. The appliance will resume its operation when the appliance is put back in an upright
position.
•
Overheat protection:
o
In case of overheating the appliance will turn off automatically due to its overheat protection.
During such situation unplug the appliance from the wall socket and let it cool down for about
I
II
" (low heating level), "
" (medium heating level) and
Publicité
