Tape Operation; Index Search - Panasonic Omnivision VHS PV-C2022-K Mode D'emploi

All manuals and user guides at all-guides.com

Tape Operation

Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information is also included.
These index marks can be used to access or scan recordings.

Index Search

Go directly to the desired recording.
1
Press SEARCH
I NDEX SEARCH
in Playback or
ENTER I NDEX NUMBER : 1
US I NG 1- 9 KEYS
Stop mode to
display INDEX
FORWARD SEARCH : FF
SEARCH screen,
REVERSE SEARCH : REW
NEXT : SEARCH
and then press
EX I T : STOP
NUMBER Keys to
select the
recording number.
•
Press FF or REW
to start search.
2
Play begins at
I NDEX SEARCH
search end. To
search forward or
back 1 index,
press FF or REW
FORWARD SEARCH : FF
while screen left in
REVERSE SEARCH : REW
displayed (10 sec.).
To cancel, press PLAY or STOP.
To calculate the Index Number
I
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 2 3 4
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1 2 3 4 7
NOTE: indicates start points of each recording.
Notes
• Make each entry within 10 seconds, or the
Index Search mode will be cancelled.
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
22
Program End Search
Locates end point of recording for continuity.
1
Press SEARCH twice in Playback or
Stop mode to display PROGRAM END
SEARCH screen .
2
SEARCH START
EX I T
To calculate number,
see below.
Example of Program End Search operation.
Fig.1
Press SEARCH button
Fig.2
Program 1
Press SEARCH button
Fig.3
If search exceeds a few seconds in BLANK area.
Program 1
End Point
Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
5 6 7
Press SEARCH button
5 6
Note
• If Program End Search is started very close
to an index mark, that mark may be
skipped over.
Press FF
PROGRAM END SEARCH
to start search.
To cancel,
Press PLAY or
: FF
STOP.
: SEARCH
PLAYBACK DIRECTION
Program 1 Program 2 or BLANK
End Point
FF
BLANK Program 2
FF
Press SEARCH button
BLANK
FF
BLANK
End Point
Program 2