Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Congratulations. You have purchased a Regent motion activated floodlight for
outdoor lighting. When installed properly, this security lighting system will provide years of
convenience and protection for your home and family.
How it works
Your Regent motion activated floodlight senses heat from
objects such as people, large animals and automobile engines.
When motion is detected, the lights will automatically turn on.
Once motion has stopped, the lights will automatically turn off
after a preselected time delay. Your motion light also has a
Night Time On and standard floodlight feature which will allow
your fixture to automatically come on at night (for a select peri-
od of time) or to operate as a standard floodlight (manual over-
ride).
What you need
• Phillips screwdriver
• Outdoor weatherproof silicone caulking
What's included
• (2) Floodlight bulbs (A)
• Motion detector and light fixture with lamp covers (B)
• Coverplate gasket (C)
• Lampholder gaskets (D)
• (2) #8 screws (E)
• (2) #6 screws (F)
• (3) Wire nuts (G)
• Mounting bracket (H)
• Center bolt (I)
• Color matched center hole plug (J)
• Light switch cover (K)
• Mounting hook (L)
What to know
• For outdoor use only.
• UL and cUL LISTED for wet locations.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. Under Part 15 of the FCC Rules, any changes or modifications to the motion
detector described in this instruction sheet that are not expressly approved by Cooper
Lighting could void the user's authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
SV275RB, CSV275RB (Bronze)
SV275RWB, CSV275RWB (White)
A
C
G
F
E
I
2
270 degrees
B
D
H
L
J
K
Publicité
