Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
For more detailed instructions on configuring and using the
Wireless Router ADSL, please refer to the online manual.
Before beginning the configuration of the Router you have to
know the parameters of your subscription ADSL.
There are five ways ─ PPPoE, PPPoA, RFC1483 routed, IPoA,
RFC1483 Bridge─ for the device to have a public IP address and
then to access Internet. You have to check with your ISP about
which way is adopted.
VPI/VCI: Consult the telephone company to get the Virtual Path
Identifier (VPI) and Virtual Channel Identifier (VCI) numbers.
The valid range for the VPI is 0 to 255 and for the VCI is 32 to
65535. The default value VPI is 0 and VCI is 32.
For BT (VPI=0, VCI=38)
NAT: The NAT feature allows multiple-user Internet access for
the cost of a single IP account. If you need to have a public server
or
a
public
Encapsulation Method: Be sure to use the encapsulation method
(LLC/SNAP
or
Gather the information as illustrated in the following table and
keep it for reference.
PPPoE
PPPoA
RFC1483
Bridged
and for KC (VPI=1, VCI=50).
network,
NAT
VC
MUX)
VPI and VCI
VC-based / LLC-based multiplexing
Username and Password
Service Name
VPI and VCI
VC-based / LLC-based multiplexing
Username and Password
VPI/VCI
VC-based / LLC-based multiplexing
ENGLISH
has
to
be
required
by
your
disabled.
ISP.
19
Publicité
Table des Matières
