Installation Method - Nextar M930 Manuel D'utilisation

INSTALLATION METHOD

This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal
mounting sleeve into the car as per the diagram illustrated below.
METAL SUPPORT STR AP
DASHBOARD
To remove the CD player from the Cage insert the
supplied keys into the Left and Right side slots of the
chassis then pull the chassis out of the cage as shown.
NOTE
PRECAUTION OF DISC PLAY:
To raise the anti-skip capability of the unit
please ensure the metal support strap is
connected firmly to the car chassis.
METAL MOUNTING SLEEVE
Remove the two screws that protect the CD
player during transportation before operating
the player.
To attach the removable faceplate, insert the right
side of the faceplate into the right side of the CD
player chassis first. Then push the left side of the
faceplate into the chassis until you hear it click .
To draw the fr ont panel out of the chassis,
please press the R EL button to eject the
front panel from the unit.
E 7
To properly fix the metal mounting
sleeve, bend the tabs of the sleeve
against the DASH BOARD with a
screwdriver.
UNIT CHASSIS
PLASTIC TRIM FR AME
FACEPLATE
＂ ＂