Location And Function Of Controls - Nextar M930 Manuel D'utilisation

LOCATION AND FUNCTION OF CONTROLS

1 2
REL
9
+
3
SEL
-
10
5
4
1. REL BUTTON
To remove the front control panel from the main body, press the REL button.
2.3.4. SEL BUTTON (Select) AND V.UP(+)/V.DN(-)BUTTONS
a) Press the SEL button briefly, it is activated as selecting each mode of E. VOL.
-> VOLUME ->BASS ->TREBLE -> BALANCE -> FADER ->
In each mode, the waiting time is about 5 seconds, and the time waiting time is
over, it returns to the last display mode of tuner or CDP mode.
VOLUME CONTROL
1) The volume can be adjusted at any time by pressing the audio level V.UP(+)
or V.DN(-) button as select mode has been initially defaulted at volume mode.
2) The volume can be also obtained by continuously pressing the SEL button
until the character VOL appear on the LCD display, then press the V.UP(+) or
V.DN(-) button to adjust the volume.
BASS CONTROL
1) Press SEL button to select the bass mode until BAS appears on the display.
2) Press the V.UP(+) or V.DN(-) button to adjust the bass.
TREBLE CONTROL
1) Press SEL button to select the treble mode until TRE appears on the display.
2) Press the V.UP(+) or V.DN(-) button to adjust the treble.
BALANCE CONTROL
1) Press SEL button to select the balance mode until BAL appears on the display.
2) Press the V.UP(+) or V.DN(-) button to adjust the left/right speaker balance.
FADER CONTROL
1) Press SEL button to select the balance mode until FAD appears on the display.
2) Press the V.UP(+) or V.DN(-) button to adjust the front/rear speaker balance.
24 6
SCN
3
2
INT
1
TOP
15 16 17
4 5
RPT RDM
18 19
E 2
7 11
CLK
BND
COMPACT
LUD
DIGITAL AUDIO
6
A.P
MODE
20 14 12
8
EJECT
22
21
ST
23
MU
13