Product Overview; Front View; Back View - Oregon Scientific msn Direct WMS801 Manuel

NOTE Indoor temperature and humidity are measured
by the product's internal sensors.
NOTE The unit takes approximately 15 minutes to
receive the MSN Direct signal. However, if the radio
signal is weak, it can take up to 24 hours to get a valid
signal reception.
Keep this manual handy as you use your new product.
It contains practical step-by-step instructions, as well as
technical specifications and warnings you should know
about.

PRODUCT OVERVIEW

FRONT VIEW

1. MESSAGE: View different messages
2. MEMORY: View current and historical
readings; temperature, humidity, UV,
barometer and rainfall
All manuals and user guides at all-guides.com
3. MODE: Change settings / display
4. ALARM: View alarm status; set alarm
5. SNOOZE / LIGHT: Activate 8-minute snooze
6. LED indicator: Color changes with
7. SELECT: Switch Areas
8. IN / REG: Toggle indoor and
9. UP / DOWN: Increase / decrease setting; enable

BACK VIEW

2
or backlight
weather message status
regional displays; activate auto-scan
/ disable alarm