Temperature Rise Table - Stiebel Eltron MINI-E 2-1 Utilisation Et Installation

SPECIFICATION
Material losses:
!
 In an installation with a permanent power supply, 
connect the power cable according to the designations
on the socket terminals.

15.3 Temperature rise table

Unit Heating Capacity
Mini-E 2-1* 1.8 kW @ 110-120 V
Mini-E 2.5-1 2.4 kW @ 110-120 V
Mini-E 3-1 3.0 kW @ 110-120 V
Mini-E 3.5-1 3.5 kW @ 110-120 V
Mini-E 4-2 2.6 kW @ 208 V
3.5 kW @ 220-240 V
Mini-E 6-2 4.3 kW @ 208 V
5.7 kW @ 220-240 V
*Mini-E 2-1 is internally restricted to 0.40 GPM (1.5 l/min)
Note: The output of the heating element depends on the supplied voltage. Fluctuating or varying voltages may cause the appliance to deliver hot water at different values
than the ones in the above table.
WWW.STIEBEL-ELTRON-USA.COM
Temp. rise above incoming water temp. (°F)
GPM
0.32 0.42 0.48 0.53 0.69
39 - - - -
51 39 34 30 24
64 49 43 38 30
75 57 50 45 35
55 42 37 33 25
75 57 50 45 35
- - 61 55 42
- - 81 73 56
Temp. rise above incoming water temp. (°C)
l/min
0.85 1.06 1.14 1.2 1.6
- - - 22 -
19 15 14 28 22
24 19 18 36 27
28 22 21 42 32
20 16 15 31 23
28 22 21 42 32
34 27 25 - -
45 36 34 - -
MINI ™ -E SERIES TANKLESS ELECTRIC WATER HEATERS | 19
1.8 2.0 2.6 3.2 4.0
- - - - -
19 17 13 11 8
24 21 17 13 11
28 25 19 16 12
21 18 14 11 9
28 25 19 16 12
34 31 23 19 15
45 41 31 25 20
4.3
-
8
10
12
8
12
14
19