Dynex DX-EBDTC Guide De L'utilisateur page 18

18
For instance:
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
4 Click Save to finish. Encryption in the wireless router is now set. Each of your
computers on your wireless network will now need to be configured with the same
security settings.
Caution: If you are using a wireless client (such as your such as your computer equipped with
To set up WPA-PSK or WPA2-PSK (no server):
Note: Choose this setting if your network does not use a radius server. WPA-PSK or
1 Select WPA-PSK or WPA2-PSK (no server) from the Network Authentication menu
on the Wireless Network Properties tab on the Edit information for a network page.
2 Select TKIP or AES from the list.
a wireless desktop card) to turn on the security settings in your wireless router, you will
temporarily lose your wireless connection until you activate security on your wireless
client. Record the key prior to applying changes in the wireless router. If you don't
remember the hex key, your client will be locked out of the wireless router.
WPA2-PSK (no server) is typically used in home and small office networking.
Setting up your wireless card