Dynex DX-EBDTC Guide De L'utilisateur page 10

Carte sans fil g amélioré pour ordinateur de bureau
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10
6 Secure the card to the case using the screw you removed from the backplate.
7 Carefully screw the antenna onto the threaded connector on the card.
8 Turn the antenna until it is pointing up.
9 Reinstall your computer's case cover.
10 Plug in the power cord and other cables, then turn on your computer. The Found New
Hardware Wizard opens.
11 Click No, not at this time, then click Next. The Welcome to the Found New Hardware
Wizard screen opens.
12 Click Install the software automatically (Recommended), then click Next. The
Completing the Found New Hardware Wizard screen opens.
Setting up your wireless card

Publicité

Table des Matières
loading

Table des Matières