Specifications - AimTTi TG1000 Instructions

Les spécifications techniques s'appliquent à la plage 18° - 28°C après une heure de réchauffage,
à une puissance de sortie maximum dans 50 Ω.
Les limites du TG1000, lorsqu'elles sont différentes, sont indiquées entre crochets [ ] après les
limites du TG2000.
WAVEFORMS
Standard waveforms of sine, square, triangle, DC, positive pulse and negative pulse.
Sine
Range:
Resolution:
Accuracy:
Temperature Stability:
Output Level:
Harmonic Distortion:
Non−harmonic Spurii:
Square
Range:
Resolution:
Symmetry Control:
Accuracy:
Output Level:
Rise and Fall Times:
Aberrations:
Triangle
Range:
Resolution:
Accuracy:
Output Level:
Linearity Error:
Positive and Negative Pulses
Range:
Resolution:
Symmetry Control:
Accuracy:
Output Level:
Rise and Fall Times:
Aberrations:
OPERATING MODES
Continuous
Continuous cycles of the selected waveform are output at the programmed frequency.
2
1mHz to 20MHz [10MHz]
1mHz or 6 digits
10 ppm for 1 year; ± 1mHz below 0.2Hz
Typically <1 ppm/ºC outside 18° to 28°C
2.5mV to 10Vp−p into 50Ω
<0.3% THD to 20kHz (typically 0.1%)
<–45dBc to 300kHz
<−35dBc to 20MHz [10MHz] (typically <−40dBc)
<–55dBc to 1MHz, <–55dBc + 6dB/octave 1MHz to 20MHz [10MHz]
1mHz to 20MHz [10MHz]
1mHz or 6 digits
20% to 80% (1% resolution) 1mHz to 20MHz [10MHz]
10 ppm for 1 year; ± 1mHz below 0.2Hz
2.5mV to 10Vp−p into 50Ω
<22ns
<5% + 2mV
1mHz to 1 MHz
1mHz or 6 digits
10 ppm for 1 year; ± 1mHz below 0.2Hz
2.5mV to 10Vp−p into 50Ω
<0.5% to 100 kHz
1mHz to 20MHz [10MHz]
1mHz or 6 digits
20% to 80% (1% resolution) 1mHz to 10MHz
10 ppm for 1 year; ± 1mHz below 0.2Hz
1.25mV to 5Vp-p into 50Ω positive or negative only pulses, with
respect to the DC Offset baseline.
<22ns
<5% + 2mV

Specifications