How To Use; To Recall The Last Temperature - weewell WTP401 Mode D'emploi

when the child is feeling well. Record readings twice a day (early morning and late afternoon).
Take the average of the two temperatures to calculate a normal body temperature.

HOW TO USE

1. Before use, please disinfect the nipple with alcohol (70% isopropyl alco-
hol) or with soap and warm water first.
2. Press the on/off button, a "Bip" sound will be heard and the last measured
temperature will be shown for about two seconds, then the L°C / L°F will
be displayed.
display range the thermometer will display either the "L" or the "H"
symbol. The display range for this thermometer is 32.0°C/89.6°Fto
42.0°C/107.6°F.
3. Put the sterilized nipple into the mouth of the baby. Once the digital de-
gree sign (°Cor°F) on the display stop flashing (usually within 3 minutes)
the current temperature will be indicated. The temperature will still re-
main after the unit is removed from the baby's mouth. Note: Drinking or
eating prior to use may affect reading. Measurement should be taken 30
minutes after eating or drinking.
4. It is recommended that the thermometer be left in the child's mouth for
6-8 minutes to allow the nipple to warm up and to obtain a more accu-
rate reading.
5. Turn off the unit, once the temperature has been measured, otherwise it
will automatically turn off within 10 minutes.
6. After cleaning and sterilizing the nipple, put the unit in a safe place.
7. Repeat this procedure as necessary if pacifying is interrupted during use.
8. Please use thermometer in the condition of temperature (10~35)°C/
(50~95)°F,relative humidity (60±20%).

To recall the last temperature

1. Press the power button and turn on the unit. The last measured tempera-
ture will be shown in the LCD display in approximately 2 seconds.
2. Then the thermometer will be in "ready to measure" mode and the re-
called temperature will be erased. Note: If the device is switched off before
completion of temperature taking, L°C/L°F will appear in memory the next
time the unit is ON.
4 I WTP401 USER MANUAL
If the temperature measured is below or above the