Abus TVVR33004 Notice D'utilisation page 113

Manual
Recording
Press the REC button or navigate to Manual
Management in the main menu to start manual
picture/video recording.
If a recording is started manually, it also has to be
stopped manually. All manual recordings will be
deactivated when the recorder is rebooted.
Click on the "Record" submenu.
Select the settings for all cameras. Click on "Off" or "On"
to change the settings.
"On (green)"  "Off (red)"
Manually stop recording
"Off (red)"  "On (yellow)"
Manual continuous recording
"On (yellow)"  "Off (red)"
Manual continuous recording is stopped and if a
schedule has been configured for the camera, it will be
activated automatically (green).
All manuals and user guides at all-guides.com
Alarm
Here, select the alarm output which should be switched
in the event of manual recording.
You can switch several alarm outputs in the event of
manual recording.
Select Trigger to activate the selected alarm output.
Click on Trigger All to activate all of the alarm outputs.
Click on Clear All to remove the settings.
Parameter
Normal
Motion
detection
Description
Click on the icon to activate continuous
recording for all channels for the whole
day.
Click on "Yes" to confirm your selection.
Click on the icon to activate motion
detection for all channels for the whole
day.
Click on "Yes" to confirm your selection.
Manual
113