Maintenance Plan; Change Of Dust Collector Bag - HOLZMANN MASCHINEN ABS 3000SE Mode D'emploi

14 MAINTENANCE
Don't clean or do maintenance on the machine while it is still connected to the
power supply:
Damages to machine and injuries might occur due to unintended switching on
of the machine!
Therefore: Switch the machine off and disconnect it from the power supply be-
fore any maintenance works or cleaning is carried out
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Before first operation as well as later on every 100 operation hours you should lubricate all con-
necting parts (if required, remove beforehand with a brush all swarfs and dust).
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
The good condition and perfect adjustment of the guiding rollers is essential for a smooth band
guidance and a clean cut.
Store the machine in a closed, dry location.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!

14.1 Maintenance plan

 Clean regularly the filter bag to ensure its filter capacity.
 You should check the dust collector hood regularly for deposits that cumulate especially on the
protective fence and clean if necessary. Failure to do so will result in lower suction capacity
and motor overload.

14.1.1 Change of dust collector bag

Empty dust collector bags when they are 60-70% full.
Switch the dust collector off and let the dust settle at least for 10 minutes.
Disconnect the dust collector from the power supply.
Do not use a dust collector bag twice.
Use solely certified dust collector bags, which match with the technical specifications, especially Ø
and height, of the dust collector
HOLZMANN MASCHINEN GmbH
NOTICE
www.holzmann-maschinen.at
ATTENTION
MAINTENANCE
26
ABS 3000SE / ABS 5000SE