Safety Warnings For Drills - Wurth Master BS 28-A Combi Instructions De Service D'origine

Table des Matières

Publicité

BS 28 Combi - GB Seite 10 Freitag, 29. Oktober 2010 7:55 07
GB
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
Wear ear protectors with impact drills. Expo-
sure to noise can cause hearing loss.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden wir-
ing or its own cord. Cutting accessory contact-
ing a „live" wire may make exposed metal
parts of the power tool „live" and could give the
operator an electric shock.
Before each use, check the machine and battery.
If damage is detected, do not use the machine.
Have repairs performed only by a qualified tech-
nician. Never open the machine yourself.
Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as
when transporting and storing, always set the
rotational direction switch to the centre posi-
tion. Otherwise danger of injury is given when
unintentionally actuating the On /Off switch.
Ensure the switch is in the off position before
inserting battery pack. Inserting the battery
pack into power tools that have the switch on
invites accidents.
Convince yourself before using that the battery
is securely seated in the machine.
Do not strain the machine so heavily that it
comes to a standstill.
When working with the machine, always hold
it firmly with both hands and provide for a
secure stance.
Use appropriate detectors to determine if util-
ity lines are hidden in the work area or call the
local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes
property damage.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
10
All manuals and user guides at all-guides.com

Safety Warnings for Drills

Battery and Battery Charger
are strictly followed. In addition, the general
safety instructions in the enclosed booklet must
be followed. Before using for the first time, ask
for a practical demonstration.
For further notes on safety refer to enclosed sheet.
Never allow children to use the machine.
Wear a dust protection mask.
For long hair, wear hair protection. Work only
with closely fitting clothes.
Be careful when screwing in long screws; dan-
ger of sliding off.
For screws, work using with a low speed.
The enclosed operating instructions for the
battery charger must be read carefully!
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of
fire when used with another battery pack.
Allow a heated battery to cool before charging.
Protect the battery from heat and fire:
Danger of explosion! Do not place the
battery on radiators or expose to strong
sun rays for a longer time; temperatures
over 50 °C cause damage.
Do not open the battery, and protect it from
impact. Store in a dry and frost-free place.
When battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
Use only original Würth parts and accesso-
ries.
Working safely with this machine is
possible only when the operating and
safety information are read completely
and the instructions contained therein
The machine must not be damp and must
also not be operated in damp surround-
ings.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

0700 647 x

Table des Matières