Fracarro CIR-AHD Serie Guide Rapide page 6

Infrared
Number and type of led
Projection distance
Checking ignition
General data
Level of protection
Power
(IR Led Off/On)
Absorption maximum
Temperature and humidity of operation
Size (WxHxD)
Weight net/gross
Not orient the camera toward the sun
Direct exposure to the sun or other light sources could damage the device. Handle with care - Shock improper could damage
the camera
Water protection and moisture.
The camera can not be opened to not reduce the seal. When adjusting the focus and zoom, be careful not to damage the
rubber seals, to avoid compromising the water resistance. The cable with all connectors (Video and Power) is not waterproof
and must be protected from the elements in a sealed housing.
Power - Be sure to respect the positive and negative polarity, as 12V from symbol, in the wiring of
taking power
Normative - In conformity with standard EN 50130-4(European directives 2004/108/EC - EMC).
In accordance with the European Directive 2004/108/EC (EMC), the product shall be installed using devices, cables and
accessories that allow to comply with this directive requirements for fixed installations
Qualified people
The product must be installed only by qualified people, according to the local safety standards and regulations.
Only instructed and authorized people can open the product. In case of failure, do not try to repair it otherwise the guarantee
will no longer be valid.
Camera mounting
•
Fix the bracket by screws and adjust the camera direction using the dedicated tool for bracket screws.
•
Protect the cable, the OSD joystick and the connectors (Video and Power) from the water. A waterproof box is highly
recommended to protect from sun, rain and humidity all the parts outside the bracket.
Lens adjustment ref. pg. 15
•
Use screws: adjust the opening angle of the lens with the screw ZOOM.
•
Use screws: adjust the focus by screw FOCUS
•
See the table of different field of view (widht) for different target distance (D).
Field of view (width)
[m]
CIR-AHD 3.6 3,6 mm
CIR-AHD 312 2,8–12mm
CIR-AHD 922 9 - 22 mm
OSD MANAGEMENT
Advanced settings are available by joystick on the cable
Up Move up / increase values
Down
Move down / decrease values
Left
Open sub-menu
Right Close sub-menu
Enter Enter menu and confirm selection
6
All manuals and user guides at all-guides.com
24 (Ø 5mm)
10 – 15 m indoor
5 – 10 m outdoor
100 / 200 mA
180 x 69 x 55 mm
450 g
Warnings
Installation instructions
D=5 m D=10 m D=15 m
6,7m 13,3m 20m
8,6–2m 17–4m 26–6m
2,7–1,1m 5,3–2,2m 8–3,3m
30 (Ø 5mm)
20 – 30 m indoor
15 – 20 m outdoor
Light sensor CDS, with regulation D>N N>D
IP66
12 Vdc +/- 10%
100 / 300 mA
-10 ~ +50 °C (Ur 85% max)
228 x 97 x 65 mm
700 g
D = Target distance
D=20 m D=25 m
26,7m 33m
34–8m 43–10m
10,7–4,4m 13,3–5,5m
54 (Ø 5mm)
30 – 40 m indoor
25 – 30 m outdoor
100 / 400 mA
260 x 110 x 65 mm
850 g
D=30 m D=35 m D=40 m
40m 46,7m 53,3m
51–12m 60–14m 68–16m
16–6,5m 18,7–7,6m 21,3–8,7m