Connect Power - Grundig GSB 910 S Mode D'emploi

Barre de son tout-en-un
Masquer les pouces Voir aussi pour GSB 910 S:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
CONNECTIONS _________________________________
Use the HDMI (ARC) Socket
ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows
you to send audio from your ARC- compliant TV to
your sound bar through a single HDMI connection.
To enjoy the ARC function, please ensure your TV
is both HDMI-CEC and ARC compliant and set up
accordingly. When correctly set up, you can use
your TV remote control to adjust the volume output
(VOL +/- and MUTE) of the sound bar.
Connect the HDMI cable (not included) from unit's
HDMI (ARC) socket to the HDMI (ARC) socket on
your ARC compliant TV. Then press the remote
control to select HDMI ARC mode.
Note:
Your TV must support the HDMI-CEC and ARC and
the HDMI-CEC and ARC must be set to On.
The setting method of HDMI-CEC and ARC may
dier depending on the TV. For details about ARC
function, please refer to the owner's manual.
Ensure that you use an HDMI cables that can sup-
port the ARC function.
HDMI-CEC will be called dierent names by dier-
ent manufacturers – please refer to your owner's
manual for details on setting up HDMI-CEC and
ARC.
BASIC OPERATION ______________________________
Select Equalizer (EQ) Effect
While playing, press the MOVIE / MUSIC / NEWS
buttons on the remote control to select MOVIE /
MUSIC / NEWS desired preset equalizers:
MOVIE
(recommended for viewing movies),
(recommended for listening to music),
mended for listening to NEWS).
20
ENGLISH
Use the OPTICAL Socket
Remove the protective cap of the OPTICAL socket,
then connect an OPTICAL cable (included) to the
TV's OPTICAL OUT socket and the OPTICAL socket
on the unit.
Tip: While in HDMI ARC, OPTICAL mode, if there's
no sound output from the unit and the status in-
dicator flashes quickly, you may need to activate
PCM signal output on your source device (eg. TV,
DVD or Blu-ray player).
Use the AUX Socket
A. Use a 3.5mm to 3.5mm audio cable (included) to
connect the TV's or external audio device head-
phone socket to the AUX socket on the unit.
B.
Use a RCA to 3.5mm audio cable (not included) to
connect the TV's audio output sockets to the AUX
socket on the unit.

Connect Power

Risk of product damage!
Ensure that the power supply voltage corresponds
to the voltage printed on the back or the underside
of the unit.
Before connecting the AC power cord, ensure you
have completed all other connections.
Connect the mains plug of the main unit to a mains
socket.
Note:
If there is no power, ensure the power cord and
plug are fully inserted and the power is turned on.
MUSIC
NEWS
(recom-

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dsb 970

Table des Matières