Care And Maintenance - Qtus Spider Manuel D'instructions

Care And Maintenance

Check your Qtus Spider regularly.
Regularly clean the Qtus Spider. Use a damp cloth and a mild
cleaning solution if necessary.
The swivel wheel holders and the front wheel axles get dirty.
Take the wheels off on a regular basis and clean them with
lukewarm water. Ensure that all parts are dried thoroughly and
oil the axles lightly with oil or silicone spray before replacing
the wheels.
Avoid exposing the Qtus Spider to extreme temperatures. The
Qtus Spider is not resistant to salt water. Never bleach, dry-
clean.
Fabrics used on the Qtus Spider are removable and washable.
Before washing always remove the fastenings, foam, plastic or
metal parts. Always refer to the washing label on each part.
During wet weather always use the rain cover. If the Qtus
Spider is wet due to cleaning or rain do not fold but leave to
dry, opened out, in a well ventilated room.
Parts of the Qtus Spider can slightly discolour or become worn
as a result of weather conditions and usage. This can also
occur with normal usage.
The utmost care was exercised in designing and compiling
these instructions. The content however, is subject to change
without notice. Qtus shall not be liable for technical errors or
omissions contained in this manual.
The purchased product may differ from the product as
described in this manual. Check for the most recent manuals
on the Qtus website.
www.Qtus.eu
21