YABER Y60 Manuel D'instructions page 10

Adjust the Tilt Base and Hang Ceiling
Adjust the tilt base:
Install the screws (included in the package) to place ①, lift the front edge of
the projector to the desired height, turn the presser foot and release the
button to lock the tilt base to the appropriate position.
Hang ceiling:
Please purchase the projector stand and 1/4 inch screw additionally.
Install the projector stand to place ②, and hang the projector on the ceiling.
( Note: You can install the Tripod Stand to the place ② )
①
②
Starting the projector
Turn on the projector by connecting the supplied power cord to the outlet,
and then pressing the main power switch. The projector will go into standby
mode and the power indicator will light red.
Only after pressing the "POWER" button on the projector or remote control
will the power indicator turn green and the projector will become ready to
use.
Select the signal source:
Press the "source" button on the remote control or the projector and choose
between: "AV", "PC-RGB", "HDMI 1", "HDMI 2", "USB".
1. Adjust the image size to get the best image size by moving the projector
back and forth, then use the focus ring to get the best focus.
Select the language menu
Language menu you have to select it when you turn on the projector for the
first time, you will see the interface in English. You can select one of the
menu languages: German, French, Italian, Spanish, Japanese and so on.
Please follow these steps:
1. Press the "meun" button and find the "OPTION" interface, then find the
"OSD Language English".
2. Press the ENTER button to execute the selection.