Important Safety Instructions; English - Honeywell HAP-16200E Mode D'emploi

IMPORTANT SAFETY INSTRUCTIONS

Read through all the instructions before starting to use the
air cleaner. Keep this user manual in a safe place for future
reference.
1. Supervision is necessary when the air cleaner is used
near children.
2. Do not use the air cleaner out of doors.
3. Do not use the air cleaner in the vicinity of a humidifier,
in a bathroom, laundry or other damp zones, or near a
swimming-pool or anywhere else where water could
splash.
4. Stand the air cleaner in its vertical or horizontal position
on a firm, even surface. Make sure the air cleaner is stan-
ding securely so that it cannot tip over or fall down. Only
use the air cleaner in a vertical or horizontal position. For
optimal cleaning performance, observe a distance of at
least 100 cm from walls, furniture or other objects.
5. Unwind the power cord completely. An incompletely
unwound power cord can lead to overheating and cause a
fire. Make sure that the power cord is not positioned
where persons could trip over it and do not rest anything
on the power cord.
6. Do not use an extension cord or an infinitely variable
speed controller. This could lead to overheating, fire or
electric shock.
7. Connect the air cleaner only with a single phase power
socket with the supply voltage as stated on the type plate
of the appliance.
8. Switch the air cleaner off and always disconnect the
power plug from the power supply when the air cleaner is
not in use, or when it is moved, handled or cleaned. Do
not tug at the power cord to disconnect the plug.
9. Keep the air cleaner clean. Do not allow any objects to
get into the air intake or air outlet vents as this could cause
an electric shock or a fire. Do not cover the air cleaner up.
Do not put any objects on the air cleaner. Do not use the
air cleaner anywhere near easily inflammable materials or
gases.
10. Do not plunge the air cleaner into water or any other
liquids and do not pour water or any other liquids over the
appliance.
11. The air cleaner must only be taken into use after it has
been installed completely and correctly, as described
under "first time of use".
12. Clean the air cleaner regularly, observing the instruc-
tions for cleaning.
13. The air cleaner must only be used according to the
instructions in this user manual. Non-observance of these
instructions could lead to injuries, fire or electric shock.
14. The air cleaner is intended only for domestic use in-
doors and not designed for commercial use.
15. If the power cord of the air cleaner is damaged, it must
be replaced by a manufacturer-approved repair centre, as
special tools are needed.
16. Do not use the air cleaner if it is damaged or could
show signs of damaged.
CONSTRUCTION
1. Power cord with power plug
2. Feet
3. Switch
4. Ionizer switch
5. Ionizer power lamp
6. Electronic filter change indicator
7. Air intake vent
8. Lock clips
9. Filter cover
10. Pre-filter – reusable
11. Pre-filter slot
12. Filter cassette
13. Active carbon filter
14. HEPA filter
15. Filter slot
16. Air outlet vent
FIRST TIME OF USE
1. Unpack the air cleaner and remove all the packaging
materials.
2. Make sure that the switch (3) is in the OFF (0) position
and that the power plug (1) is not connected to the power
supply.
3. Stand the air cleaner on the feet (2) corresponding to
the horizontal or vertical position.
4. Release the lock clips (8) and take the filter cover (9) off
the air cleaner.
5. Press the filter cassette (12) slightly downwards and
take it out of its slot (15).
6. Remove all the packaging material from the filter cas-
sette (12).
7. Replace the filter cassette (12) firmly in its slot (15)
until you hear it click into place. Replace the filter cover (9)
so that the lock clips (8) click into place. Make sure that
the filter cover (9) is mounted securely.
USER INSTRUCTIONS
1. Stand the air cleaner on its feet (2) in a horizontal or
vertical position on a firm, even surface. For optimal clea-
5

ENGLISH