Installing The Base; Install; Adjusting Screen Position; Connecting The Power Cord - Toshiba TekBright PA3552 Serie Manuel De L'utilisateur

User's Manual

Installing the Base

Install

Carefully align the four hooks on the bottom of the monitor with the
corresponding slots on the base. The monitor will click into place.

Adjusting screen position

To optimize the best viewing position, you can adjust the tilt of the monitor.
The monitor can be adjusted to 20 degrees up or 5 degrees down from the
standard upright position as shown. Use both hands to hold the edges of
the monitor when you adjust it.

Connecting the power cord

■
First check to make sure that the power cord you use is the correct type
required for your area.
■
This monitor has a universal power supply that allows operation in
either 100/120V AC or 220/240 V AC voltage areas. No user-
adjustment is required.
■
Plug one end of the power cord to the AC Inlet on the monitor and plug
the other end to a proper AC outlet.
■
If you need to use an extension cord or power strip
8