Publicité
F E AT U R E S - O P E R AT I O N S
INSTALLATION INSTRUCTION:
Figure 1
A. Control Panel
B. Fan Housing
C. Remote Control
Storage
ASSEMBLY INSTRUCTIONS:
Estimated assembly time: 5-10 minutes
(tools required: Screwdriver)
NOTE: MAKE SURE YOU REMOVE ALL CONTENTS FROM
THE PACKAGE. PLEASE CHECK PACKAGING MATERIALS FOR
PARTS THAT COULD BE REQUIRED TO OPERATE YOUR FAN.
1. Assemble base halves around power cord. To secure the
base halves together, slide the posts of one base half
into the slots of the second base half. Refer to Figure 2.
(SEE FIGURE 1)
A
C
E
B
D
D. Base Halves
E. Remote Control
(SEE FIGURE 2)
Figure 2
2. Line up the screws holes of the base halves with
the holes located on the bottom of the fan housing.
Secure with the four screws included with the
product. Refer to Figure 2.
3. Run the Power Cord through the cord channel located
underneath the base. Refer to Figure 2.
4. Turn fan right side up and place on a dry and level surface.
OPERATING INSTRUCTIONS:
1. To turn the fan on, press the power/speed button(
/ ) located on the control panel or press the power
button( ) on the remote control.
2. The fan will run at the lowest speed setting (1). To
cycle through to higher speed settings (2-3-4-5),
press the power/speed button( / ) located on
the control panel or press the speed button (
the remote control. The corresponding indicator light
will illuminate to indicate which setting is selected.
Power Cord
(SEE FIGURE 3, 4)
) on
Publicité
