LG SJ4R Manuel page 9

SIMPLE MANUAL
Wireless
Rear Speakers
Kit
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
MODEL
SPJ4-S
MFL70205121
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
SPJ4-S.DCANLLK_SIM_ENG_FRE_5121.indd 1-4
1 Rear Speakers Connection 2 Wireless Receiver Connection
a Connect the power cord of wireless receiver to
Speaker design and connection method may be
the outlet.
different according to models.
b
Turn on the unit: The unit and wireless receiver
will be automatically connected. The receiver's
yellow - green LED turns on.
Wireless Receiver Connection Manually
Transparent
If the rear speakers do not make sound, try to
connect manually.
Black stripe
a Press PAIRING button on the rear of the
Rear speaker
(Left) wireless receiver.
y The yellow - green LED on the wireless receiver
blinks quickly.
b Turn on the main unit.
Wireless Rear speaker
Receiver
(Right)
c Pairing is completed.
y The yellow - green LED on the wireless receiver
Black stripe
turns on.
Transparent
a Connect the speaker cables to rear speakers
correctly.
b Connect the Wireless Receiver and the rear
speakers (Grey: right, Blue: left) with the speaker
cables.
c Turn on the Surrond function to enjoy surround
sound.
www.lg.com
Surround Sound On/Off Additional Information
Specification of Wireless reciever
When you turn on surround function, you can enjoy
magnificent surround sound for all the input sound
Power Refer to the main label on the
source with rear speakers.
requirement wireless receiver.
Refer to the main label on the
Power
The initial setting for the surround function is
wireless receiver.
consumption
OFF, turn the surround function ON to use it.
Approx.
Dimensions 60 mm x 220 mm x 175 mm
SJ4R/SJ4Y
(W x H x D) (2.36 inches x 8.66 inches x
Surround On: Press and hold REAR LEVEL button
o 6.88 inches)
on the remote control about 2 seconds.
Design and specifications are subject to change
Surround Off: Press and hold REAR LEVEL button without notice.
p
on the remote control about 2 seconds.
About Ferrite Core (Optional)
SJ5Y
twice
Surround On: Press and hold AUTO VOL button on the
remote control about 2 seconds. and then press AUTO
VOL button repeateadly to select ON - SURROUND in
the display window.
Surround Off: Press and hold AUTO VOL button on the
remote control about 2 seconds. and then press AUTO
VOL button repeateadly to select OFF - SURROUND in
the display window.
Industry Canada Statement WARNING
This device complies with Industry Canada' s applicable [For product having the wireless function using 5 GHz
licence-exempt RSSs. Operation is subject to the following frequency bands]
two conditions: (i) the device for operation in the band 5150–5250
(1) This device may not cause interference; and MHz is only for indoor use to reduce the potential for
(2) This device must accept any interference, including harmful interference to co-channel mobile satellite
interference that may cause undesired operation of systems;
the device. (ii) for devices with detachable antenna(s), the maximum
antenna gain permitted for devices in the bands
5250-5350 MHz and 5470-5725 MHz shall be such
CAN ICES-3 (B)/NMB-3 (B)
that the equipment still complies with the e.i.r.p. limit;
IC Radiation Exposure Statement (iii) for devices with detachable antenna(s), the maximum
This equipment complies with IC radiation exposure limits antenna gain permitted for devices in the band 5725-
set forth for an uncontrolled environment. 5850 MHz shall be such that the equipment still
complies with the e.i.r.p. limits specified for point-to-
This equipment should be installed and operated with
point and non-point-to-point operation as appropriate;
minimum distance 20 cm (7.8 inches) between the
and
antenna & your body.
(iv) the worst-case tilt angle(s) necessary to remain
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
compliant with the e.i.r.p. elevation mask requirement
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
set forth in Section 6.2.2(3) shall be clearly indicated.
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
(devices operating in the band 5250-5350 MHz with
SUCH MODIFICATIONS COULD VOID THE USER'S
a maximum e.i.r.p. greater than 200 mW)
AUTHORITY TO OPERATE THE EQUIPMENT.
(v) High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250–5350 MHz and
5650–5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
LG Customer Information Center
1 888 542-2623 CANADA
Register your product Online!
www.lg.com
2017-12-19 9:50:42