Adjusting The Seat Position - lidl 315318 Notice D'utilisation

• Check the item regularly every 3 months
for stability and tightness of the screws and
all connections, and re-tighten if necessary.
Contact the product hotline if in doubt.
Assembly
Note! Assembly requires a Phillips screw driver
for (not included).
1. Remove all parts from the packaging.
2. Place the seat top (3) upside-down on the
ground (Fig. B).
3. Place the seat tubing (2) and (1) across one
another on the underside of the seat top
(Fig. B).
Note: be sure to place the seat tubing (1) and
(2) one the other exactly in the middle.
4. Attach the seat tubing (1) (2) to the seat top
(3) with the screws (4), using one washer (5)
per screw (Fig. C).
Note: initially, screw each screw only lightly
into the seat tubing (1) and (2).
5. Tighten the screws (4).
6. Insert the legs (6) into the seat tubing (1) and
(2) (Fig. D).
Note: when adjusting the seat height, ensure
the adjustment pin clicks into place audibly.

Adjusting the seat position

Warning!
• Take care not to get pinched by the holes.
• Do not use the item if the height adjustment
pin is not locked in the hole!
• Set all legs to the same height, to avoid
tipping of the item!
1. Press the pins on the tubing and pull the legs
out to the desired height. The pins must click
visibly and audibly into the holes (Fig. E).
2. Set all legs to the same height.
3. Turn the rubber feet until the lock firmly onto
the shower floor (Fig. F).
Use
Climb into the shower and sit on the item, then
wash yourself.
Note: while washing, you can insert the shower
head into the provided recess (3a) (Fig. F).
All manuals and user guides at all-guides.com
Repairs
Do not modify the item or repair it yourself!
Purchase spare parts from the manufacturer or
from a specialist only.
Improper repairs can cause unforeseen harm!
Care
Wash the item as necessary with a damp cloth
and, if required, a gentle cleaning agent.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the pack-
aging materials out of the reach of children.
Dispose of the products and the
packaging in an environmentally
friendly manner.
The recycling code is used to identify
various materials for recycling.
The code consists of the recycling symbol –
which is meant to reflect the recycling cycle –
and a number which identifies the material.
Notes on the guarantee and
service handling
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse
or improper handling. Your statutory rights,
especially the warranty rights, are not affected
by this warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
GB/IE 9