Fisher-Price AquaSmart WL37T26KW2 Instructions D'installation page 31

AquaPlus Rinse
On the High Efficiency cycles you can
change the pre-set rinse option.
The pre-set rinse option on these cycles
is a water efficient Aqua shower rinse.
This rinse can be altered to provide
a more intensive rinse for people with
sensitive skin.
Enter the Option Adjustment mode (refer to page 28).
1
Press SOFTENER to change to an AquaPlus rinse (dispensing model); or SPIN to illuminate "Med"
2
spin to select AquaPlus rinse (non-dispensing model).
Press POWER to save your selection.
3
End of Cycle beeps
Note: This option is not available on the
non-dispensing model.
The number of beeps that signal the end of
the cycle can be altered. Choose between
no beeps, five or fifteen beeps. The BLEACH
button adjusts the cycle signal setting.
Enter the Option Adjustment mode (refer to page 28).
1
Press the BLEACH button to adjust the cycle signal setting.
2
Press POWER to save your selection.
3
All manuals and user guides at all-guides.com
Changing pre-set options
Rinse Options – dispensing model
Softener ON
Softener OFF
Rinse Options – non-dispensing model
Med spin light ON
Med spin light OFF
End of Cycle Beeps
No selection
Bleach OFF
Bleach ON
29
AquaPlus Rinse
Aqua Rinse
AquaPlus Rinse
Aqua Rinse
No beeps
5 beeps
15 beeps
EN