Grandstream GVC3202 Guide D'installation Rapide page 7

Connecting example:
Connect HDMI cable from
GVC3202 HDMI IN port to
laptop's HDMI port. This is
for presentation.
Connect
from the GVC3202 HDMI
OUT port 1 to TV's HDMI
port.
Note:
For more information about how to install and connect the
GVC3202, please visit the GVC3202 product web page
from http://www.grandstream.com/support
GAC2500 INTERFACES
RJ48 Cascade RJ45 Ethernet
Port Port
9
Connect GAC2500 to
GVC3202 SPKR port. Use
the USB extension cable in
the package if necessary.
Connect Ethernet cable from
GVC3202 LAN port to hub/
switch/router (LAN side).
12V DC power adapter is
connected into outlet.
HDMI cable
E
E
Micro-USB 3.5mm Audio
12V Power
Connector Port Port
USING THE GVC3202 REMOTE CONTROL
LED Indicator
Back
Home
Shortcut Keys
Volume Down
OK
Zoom Out
PIP
Send/Answer/Add
Party Into Conference
Backspace
Standard Keypad
* / Record
1. Open the battery cover on the back of the remote control. Place four AAA
batteries proprely and put the cover back on.
2. When using the GVC3202 for the first time, the remote control should be paired
and connected to it via Bluetooth already. After the GVC3202 fully boots up, tap
on the OK button on the remote control to initiate the connection. Then the
remote control can be used normally.
If the remote control is not paired with the GVC3202 anymore (e.g., a factory reset
is made), follow the steps below to pair and connect the remote control:
1. Connect a USB mouse to the GVC3202 USB port. Or, log in the GVC3202 web
UI and click on "Remote Control" on the upper right corner to bring up the
virtual remote control.
2. Use the USB mouse or the virtual remote control to navigate to the idle screen
Menu→Settings→Network→Bluetooth on the TV.
3. Select and click on "Search for devices".
4. On the remote control, press OK button and number 5 button at the same time
for about 4 seconds. This will initiate pairing process on the remote control.
5. The remote control MAC address will show in the new device list on your TV.
Select it and it will be paired and connected to the GVC3202 shortly.
Power ON/OFF
Trackpad
Menu
IPVT-Personal Room
Volume Up
Navigation Keys: Up/Down,
Left/Right
Zoom In
Presentation
End Call / Remove Party
from Conference
Camera
# / Information
Mute / DND
10