Grandstream GVC3202 Guide D'installation Rapide page 4

PRECAUTIONS:
WARNING:
Use only the power adapter included in the GVC3202 package.
Using an alternative non-qualified power adapter may possibly damage the unit.
WARNING:
Please DO NOT power cycle the GVC3202 during system boot
up or firmware upgrade. You may corrupt firmware images and cause the unit to
malfunction.
OVERVIEW:
The GVC3202 offers businesses a revolutionary video conferencing system with
unprecedented flexibility and the support for multiple popular video conferencing
protocols out of the box. Based on Android 4.4™, in addition to Grandstream's in-
dustry leading SIP-based video conferencing platform. The GVC3202 sets a new
bar for enterprise class video conferencing solution in terms of flexibility, interop-
erability, system openness, application richness and ease of use in the modern
Internet age.
INSTALLATION:
The GVC3202 can be installed in the following three ways:
Option 1: Place on desktop.
Option 2: Mount on TV/Monitor. Wall mount bracket is required.
Option 3: Mount on wall. Wall mount bracket is required.
The wall mount bracket comes assembled as one piece. It can be separated into
two parts by sliding/pushing Part A outwards from Part B.
Slide or push Part A outwards.
3
Built-in
Screw
Silicon
Stopper
Part A
Locating Pin
Part B
INSTALLING BRACKET TO MOUNT THE GVC3202 ON
TV/MONITOR:
1. Locate the wall mount bracket in the package and identify Part A and Part B.
Please DO NOT detach part A from part B when mounting the bracket on TV.
2. Place GVC3202 on the top of the wall mount bracket Part A. See figure below.
The locating pin on Part A should fit into the hole on the bottom of the GVC3202.
4. Mount the wall mount bracket on top
of the TV from behind the TV. Slide
wall mount bracket Part B on Part A
carefully to adjust the space until the
TV can be clamped in properly.
3. Tighten the built-in screw on
wall mount bracket Part A to
make sure the GVC3202 fits
securely.
4