Before You Start; Initial Settings - Samsung WW10J5 Serie Manuel D'utilisation

Before you start

Initial settings

Run Calibration (recommended)
Calibration ensures accurate weight
detection by the washing machine. Make
sure the drum is empty before running
Calibration.
1. Power off, and then power on the
washing machine.
2. Hold down Temp. and Delay End
simultaneously for 3 seconds to enter
Calibration mode. The "CB" message
appears.
3. Press Start/Pause to run the
Calibration cycle.
4. The drum will rotate clockwise
and counter-clockwise for about 3
minutes.
5. When the cycle is complete, "0" appears
on the display and the washing machine
will turn off automatically.
6. The washing machine is now ready for
use.
WW10J5260GW_03504U-01_EN.indd 23
English 23
2016/4/1 13:40:24