Parts List - ITC SCMS12UD Manuel De L'utilisateur

WARRANTY
ITC branded power tools, air nailers staplers and compressors are designed for use in
DIY (do-it-yourself), light or intermittent duty, semi-professional applications. They are not
intended for use in professional, production, industrial or continual use applications.
ITC makes every effort to ensure that its products meet high quality and durability standards
and are warranted for two years against manufacturers' faults and defects for a period of two
years from the date of purchase to the original owner. ITC will REPAIR OR REPLACE (at
our discretion) merchandise deemed by the company to be defective, provided that it is has
not been misused, abused, altered, or repaired by anyone other than an authorized repair
centre.
Please consult the ITC catalogue or your nearest ITC distributor to determine those products
that are covered by our over-the counter warranty. Any ITC tool that fails during normal
use and within the specified warranty period and qualifies for over-the counter warranty
must be returned to its point of purchase for replacement or credit. Any item not listed as
over-the-counter warranty must be shipped, prepaid freight, to an authorized repair depot
accompanied by a copy of the invoice specifying the date that the item was purchased.
Returned tools that are not accompanied by a proof of purchase (Copy of Invoice) will not be
repaired or replaced under warranty.
This warranty does not extend to normal wear or consumable parts such as brad and staple
gun driver blades, grinding discs, saw blades, driver bits, electric motor brushes, worn
chords, etc. It also does not apply to ITC tools used in professional, production, industrial or
continual use applications.
For a listing of the authorized repair centers please refer to the ITC catalogue.

PARTS LIST

Please refer to the schematic drawing on the pages following the parts list.
N DESCRIPTION
o.
1 Table extension
2 Butterfly Screw
 Rubber Foot
4 Base
5 Hex hd screw
6 Cushion plate
7 Rotating Table
8 Pan head screw
9 Plate
10 Link
11 Screw
12 Pan head screw
1 Left kerf plate
14 Right kerf plate
15 Flat washer
16 Lock nut
17 Screw
18 Scale
19 Screw
20 Hex hd screw
21 Nut
22 Spring
2 Locking knob
24 Flat washer
25 Lock nut
26 Cover
10
012026
N DESCRIPTION
o.
27 Spring
28 Adjusting handle
29 Nut
0 Rubber pole
1 Bracket
2 Washer
 Pan hd screw
34 Butterfly Screw
35 Locking Button
6 Bracket
37 Hex hd screw
8 Depth adjustment plate
39 Washer
40 Screw
41 Long slide bar
42 Bearing
43 Cover
44 Pivot shaft
45 Spring
46 Fence
47 Lock washer
48 Hex hd screw
49 Butterfly Screw
50 Shaft