Important Safety Instructions; Using The Appliance - Beper 90.354 Manuel D'instructions

Milk warmer Use instructions

IMPORTANT SAFETY INSTRUCTIONS

Use this appliance only for the purposes shown in this instruction manual. Any other usages should
be considered dangerous. The product should only be connected; please check always that the
voltage corresponds to the one shown on the unit rating label. Always unplug the product after every
usage, before cleaning it, or in case it does not work properly. Never use the product in case the
power cable has been damaged and/or the product has been damaged or it does not work properly.
In case of damages to the correct product functioning always address to specialised centre. Never
try to repair the product by yourself; otherwise the warranty will be not valid anymore.
Attention: the product is not a toy and should be kept out of the children's reach, place it always out
of their reach and never leave it unattended. Always place and store the product away from heating
sources, sunlight, dampness and sharp objects.
PRECAUTIONS
To avoid risk of electric shock, do not immerse the appliance, its power cord or any of its parts in
water or any other liquid.
If the appliance or the power cord display visible signs of damage, immediately unplug the appliance
from the electrical outlet and do not use it. Do not use the appliance outdoors.
Do not place it on excessively hot surfaces. Do not handle or move the product when it is in use or
when it contains very hot water.
Remove the power cord when the product is not in use and before cleaning it.
Make sure that the bottle or food jar to be placed in the appliance is at a safe temperature before
proceeding to heat it.
This appliance is intended exclusively for domestic use.
Do not immerse the appliance in water
The bottle warmer is for heating foods but not for cooking them. The recommended temperature is
37°.
Attention: the product is not a toy and should be kept out of the children's reach, place it always out
of their reach and never leave it unattended.
Unplug always the unit, before getting out of your car. Never leave the unit unattended in case it is
connected to the plug.

USING THE APPLIANCE

1- First clean the appliance and its part/accessories, as indicated in the paragraph below.
2- Place the appliance on a flat, stable surface, out of children's reach, where there is no risk of it
being accidentally bumped while in use.
3- Remove the measuring cup from its holder and fill it with water for heating the bottle or food jar.
See the indications in the table below for the correct quantity of water to put in the heater chamber:
Note: the bottles and food jars are heated by steam. The dimensions and material of the bottle or
food jar (glass or plastic) and the type and quantity of liquid or food to be heated can have an effect
on the heating time. If the bottle or food jar is not hot enough after the heating cycle, add more water
the following time. If, however, the bottles and food jars are too hot, reduce the quantity of water.
4- Now place the bottle in the large basket and lower this into the chamber. For food jars, use the
other basket (which is stored inside the larger basket).
Note: give the food to your baby soon after heating, without allowing too much time to pass. This will
help avoid the spread of germs.
5- Plug the appliance into the power outlet.
6- Follow the instructions below according to the function would like to use:
8