ARENDO COLAZIONE Mode D'emploi page 23

4. Product details
Slide switch
Rotary switch provided for adjust-
ing the degree of toasting
5. Commissioning and use
Connect the power cord to a properly wired power socket. First proceed as
described in Section "3 Commissioning".
Ensure that the power plug has been inserted. Insert up to two toast slices into
the toast slot. Turn the "rotary switch provided for adjusting the degree of toast-
ing" to the desired level and press the "slide switch" down until it snaps in place.
The heating elements warm up and the toasting process begins.
Once the process is complete, the "slide switch" automatically jumps back to its
original position. This means that the toasting process has finished and the bread
slices can be taken out carefully.
If the degree of toasting is not satisfactory, adjust it using the "rotary switch pro-
vided for adjusting the degree of toasting" and repeat the toasting again. In this
case, ensure that the toast does not get burnt. If the desired degree of toasting
has already been attained, you may then end the process at any time by pressing
the "CANCEL" key.
English
"DEFROST" button
"REHEAT" button
"CANCEL" button
Toast slot
Crumb collector
23