Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver
(Set-Top Box) via Component cables
TV Rear Panel
1
Component Cable (Not supplied)
Audio Cable (Not supplied)
Connecting a VCR
TV Rear Panel
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
VCR Rear Panel
1
Video Cable (Not supplied)
Audio Cable (Not supplied)
English-
Connect a Component Cable between
1
the COMPONENT IN [Y, P
on the TV and the COMPONENT [Y,
P
, P
] jacks on the DVD / Blu-ray
B
R
player / Cable Box / Satellite receiver
(Set-Top Box).
Connect Audio Cables between the
COMPONENT IN [R-AUDIO-L] jacks
on the TV and the AUDIO OUT jacks
on the DVD / Blu-ray player / Cable
Box / Satellite receiver (Set-Top Box).
Component video separates the video into
➣
Y (Luminance (brightness)), Pb (Blue) and
Pr (Red) for enhanced video quality. Be sure
to match the component video and audio
connections. For example, if connecting a
Component video cable to COMPONENT IN,
connect the audio cable to COMPONENT IN
also.
Each DVD / Blu-ray player / Cable Box /
➣
Satellite receiver (Set-Top Box) has a different
back panel configuration.
When connecting a DVD / Blu-ray player /
➣
Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to
the cable.
Connect a Video Cable
1
between the AV IN [VIDEO]
jack on the TV and the VIDEO
OUT jack on the VCR.
Connect Audio Cables between
the AV IN [R-AUDIO-L] jacks
on the TV and the AUDIO OUT
jacks on the VCR.
If you have a 'mono' (non-stereo) VCR,
➣
use a Y-connector (not supplied) to
connect to the right and left audio input
jacks of the TV. Alternatively, connect
the cable to the 'R' jack. If your VCR is
stereo, you must connect two cables.
Each VCR has a different back
➣
panel configuration.
When connecting a VCR, match
➣
the color of the connection
terminal to the cable.
, P
] jacks
B
R
Publicité
Table des Matières
