Know Your Product; Installing And Removing Bits - ITC SPT190 Manuel De L'utilisateur

FIG A
All manuals and user guides at all-guides.com

KNOW YOUR PRODUCT

1. On/Off switch
2. Trigger lock-on button
. Collet
4. Router base
5. Locking bolts for straight guide
6. Plunge locking lever
7. Speed adjustment wheel
8. Depth stop
9. Depth stop turret
10. Depth stop locking knob
11. Depth stop adjustment wheel
12. Fine adjustment knob
13. Carbon brush holder
14. Spindle Lock
15. Collet Nut
16. Dust collection hose adaptor
OPERATING INSTRUCTIONS

INSTALLING AND REMOVING BITS

There are a number of router bits available for cutting various profiles in wood.
This machine is supplied with 3 collets; 1/4", 3/8" & 1/2". Some cutter heads are
too large and do not leave enough space for the dust extraction system. In this
case, a mask should be worn.
WARNING: Disconnect router from the power source before changing router bits
or collets.
To insert the collet:
1. Position the router on its side on the table with the Router Base (4) pointing
towards you.
2. Locate the Spindle Lock (14) at the front of the router.
. Press it down and hold it in this position.
4. Using the wrench provided, loosen the Collet Nut (15) by turning it counter
clockwise.
FIG B
5