ITC SPT190 Manuel De L'utilisateur page 4

SAFETY INSTRUCTIONS FOR ROUTERS
KEEP IN MIND THE ROTATION DIRECTION OF THE ROUTER BIT AND THE
n
WAY YOU FEED IT IN.
DON'T LEAVE THE ROUTER RUNNING UNATTENDED.
n
DO NOT TOUCH THE BIT RIGHT AFTER USE. It will be very hot and can burn
n
your skin.
REMOVE THE MACHINE FROM THE WORKPIECE AFTER IT HAS BEEN
n
SWITCHED OFF AND IT HAS COME TO A COMPLETE STOP.
SPECIFICATIONS
SPECIFICATIONS
Your new Plunge Router Kit comprises:
n 1/2" Plunge router
n Edge cutting guide
n Trimmer guide
n Template guide insert
n Three collets – 1/4", 3/8" & 1/2"
n Twelve 1/2" shank carbide tipped router bits:
1/2" Flush trim bit
7/8" Cove bit
7/8" Round-over bit
1-1/8" Round-over bit
1" Ogee bit
1-1/4" 45 degree chamfer bit
1/4" Straight cutting bit
1/2" Straight cutting bit
5/8" Straight cutting bit
1/2" Dovetail bit
1/2" 90 degree V-Groove bit
1/2" Core box bit
n Dust collector/Vacuum hose adapter
n Collet wrench
n Turret adjustment wrench
n Spare set carbon brushes
n Blow mold case
n Manual
FEATURES:
n 120 volt, 60Hz, 15A
n Variable speed: 9,000 – 23,000 rpm
n Lock-on trigger switch
n Seven position stopper with 2" plunge depth
n Shaft lock
n Soft grip finish housing
n Easy access motor brushes
n Double insulated
n CSA certification
n Tool weight: 3.1 kg (7 lb.)

All manuals and user guides at all-guides.com