Leuze BCL 21 Mode D'emploi page 16

Safety
This sensor was developed, manufactured and tested in line with the applicable
safety standards. It corresponds to the state of the art.
Intended use
Bar code readers of the BCL 2x series are conceived as stationary, high-speed
scanners with integrated decoders for all current bar codes used for automatic
object detection.
Areas of application
The bar code readers of the BCL 2x series are designed for the following areas of
application:
- Labeling and packaging machines
- Automatic analyzers
- Space-critical bar code reading tasks
- Storage and conveying engineering, in particular for object identification on
fast-moving conveyor belts
- Pharmaceutical industry
CAUTION!
Observe intended use!
 Only operate the device in accordance with its intended use. The
protection of personnel and the device cannot be guaranteed if the
device is operated in a manner not complying with its intended use.
Leuze electronic GmbH + Co. KG is not liable for damages caused
by improper use.
 Read the technical description before commissioning the device.
Knowledge of this technical description is an element of proper use.
NOTE
Comply with conditions and regulations!
 Observe the locally applicable legal regulations and the rules of the
employer's liability insurance association.
Foreseeable misuse
Any use other than that defined under the "Approved purpose" or which goes bey-
ond that use is considered improper use.
In particular, use of the device is not permitted in the following cases:
- Rooms with explosive atmospheres
- In circuits which are relevant to safety
- Operation for medical purposes
EN
16